|
MOTOREX SWISSCOOL 7300 CF
1. Application
MOTOREX SWISSCOOL 7300 CF is mainly used for grinding of carbide tools and profiles. A cobalt wash out cannot occur.
MOTOREX SWISSCOOL 7300 CF is a water-miscible cooling lubricant, free of mineral oil, chlorine, nitrite and zinc. Mixed with water it provides a transparent, water-clear solution. The high resistance to micro-organisms is ascertained by the use of special additives and hence the solution counts as very biostable.
MOTOREX SWISSCOOL 7300 CF gives good corrosion protection, is extremely low-frothing, does not leave sticky residues and provides good netting and scavenging actions. It is very mild to the skin thanks to the careful selection and combination of its ingredients.
2. Advantages
- non-aggressive to seals, paint, rubber and plastic
- no sticky residue and gumming --------------> reduced maintenance
- very stable -----------> long service life
- reduced dressing cycles
- chlorine-free
- nitrite-free
- no cobalt wash out
- zinc-free
- very stable
3. Data
|
|
| Density at 15° C |
1,09 |
| Viscosity at 20° C |
9 mm2/s |
| Ph-value of solution |
8,6 |
| Corrosion test on GG 25 chips, |
|
| Solution 1:10 1:18 |
0-0 |
| Factor for hand-refractometer RN-1 |
2,0 |
| Recommended application concentration |
4,0 % |
4. Notes
|
|
| ADR/SDR/IMCO: not classified |
Non-toxic |
|
